Bb-electronics EIR-EXTEND-C - Quick Start Guide Uživatelský manuál stáhnout pdf (Strana 2)

EIR-EXTEND-C-0812qsg

DIP Switch Settings

Ports

Top LEDs (BNC Line Connections)

LEDs

Status

Speed

Distance

Green

1~ 5Mbps

up to 2600M

Amber

6~10Mbps

up to 2400M

Green

11~16Mbps

up to 2000M

Amber

17~20Mbps

up to 1800M

Green

21~29Mbps

up to 1600M

Amber

30~43Mbps

up to 1400M

Green

44~54Mbps

up to 1200M

Amber

55~63Mbps

up to 1000M

Green

64~74Mbps

up to 600M

Amber

75~85Mbps

up to 200M

The Ethernet Extender has two ports, a RJ-45

10/100Base TX port and the Ethernet Extender port.

Existing coaxial cable can be used. If coaxial cable

requires termination, use BNC or F-connectors. F style

will require BNC to F-Type adaptor. When BNC extender

ports on the units are connected, Lnk LED should be lit.

Ethernet Extender mode settings are made very simple by

means of a switch at the top of the Ethernet Extender. One

device must be set to local (Loc) and the other to

remote (Rmt) before devices are connected.

It makes no difference which unit is designated local and

remote as long as they are not both set the same.

BNC to F-Type Adaptor

Note: Distance and speed may vary. The above table

represents the maximum performance which can be

expected under ideal conditions.

Spring loaded DIN rail clip on

back of Ethernet Extender

BNC port

RJ-45 10/100Bas TX port

1 2

Quick Start Guide 1

Komentáře k této Příručce

Žádné komentáře

Bb-electronics EIR-EXTEND-C - Quick Start Guide Uživatelský manuál Strana 2

Komentáře k této Příručce

Související produkty a manuály pro Příslušenství komunikace Bb-electronics EIR-EXTEND-C - Quick Start Guide